机械加工厂空调解决方案

 工厂车间空调    |      2016-04-06
针对机械加工厂的空调解决方案,机械加工厂的特点为生产工作场所,机械加工厂有少量发热设备,机械加工厂内生产人员不会太多。根据机械加工厂的特点,空调选型推荐如下:L65机型。
This is a solution of A/C for a mechanical workshop. The characteristic of the mechanical workshop is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the mechanical workshop, the selection of model is recommended as L65.
经济效益评估:(Economic Evaluation)
  • 该机械加工厂需安装空调面积总计1000平方米左右,有少量发热设备,对温湿控制及节能有要求,依据实际情况每平米所需制冷量平均按350W计算,总需求的350KW制冷量。
The total area is of about 1000 square meters for the wood plant, and there is a small amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 350KW.
  • 要满足该项目350KW的制冷量,需使用L65机组6套装机。
To meet the cooling capacity of 350KW, this project is needed to use six sets of unit (L65).
  • 经济效益对比估算:传统空调满足350KW制冷量的输入功率至少为130KW左右,而L65机组6套主机的输入功率合计为80KW,主机部分省电38.5%,全年共计节省电费9.6万元以上。(按1年运行8个月,1月运行30天,1天运行8小时,用电按1元1度计算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (350KW cooling capacity) is at least about 130KW, and the L65 input power per set is of 13.3KW. The energy saving is up to 38.5%. The annual saving is more than 96000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)